True
Product Image

Grove - LoRa-E5 (STM32WLE5JC)

₱ 1,300.00 ₱ 1,300.00

Grove - LoRa-E5 (STM32WLE5JC)

Create a new review

Grove LoRa-E5 embedded with LoRa-E5 STM32WLE5JC, powered by ARM Cortex M4 ultra-low-power MCU core and LoRa SX126x, is an easy-to-use wireless radio module, supporting LoRaWAN protocol on the EU868 & US915 frequency and (G)FSK, BPSK, (G)MSK, LoRa modulations.

1

₱ 1,300.00 ₱ 1,300.00 1300.0 PHP

₱ 1,300.00

(0% Off)
Days
:
Hours
:
Mins
:
Secs

    This combination does not exist.

    Add to Cart
    SKU:
    N/A

    Category:

  • Modules
  • Share :

    Seeed Studio

    Seeed has been serving the global developer community since 2008, by providing open technology and agile manufacturing services, with the mission to make hardware more accessible and lower the threshold for hardware innovation. With Shenzhen’s vast resources, and trusted technology and distribution partners around the world, Seeed strives to be the most integrated platform for creating hardware solutions for IoT, edge AI applications.


    • 30-day money-back
    • 7-day returns
    • Shipping: 2-3 Days

    LoRa-E5 LoRaWAN STM32WLE5JC module is the major functional part integrated into Grove - LoRa-E5. It is a LoRaWAN module that embedded with ARM Cortex M4 ultra-low-power MCU core and LoRa SX126x, as the world-first combo of LoRa RF and MCU chip into one single tiny module, it supports (G)FSK, BPSK, (G)MSK, and LoRa modulations, and is FCC, CE certified. Grove - LoRa-E5 features extremely compacted size, ultra-low power consumption, low cost, and amazing performance.

    Features

    • LoRa-E5 (STM32WLE5JC) embedded

    • Support LoRaWAN protocol on EU868/US915 frequency band

    • Ultra-long transmitting range up to 10km (Ideal value in open space)

    • Easy control by AT command via UART connection

    • Rapid prototyping with plug-and-play Grove interfaces

    • Ultra-low power consumption and high performance

    Grove - LoRa-E5 can endow your development boards' strong features of ultra-long transmitting range, great performance, and high efficiency by easily plug and play with Grove connector on board. By connecting Grove - LoRa-E5 to your development boards, your devices are able to communicate with and control LoRa-E5 conveniently by AT command through UART connection. 

    With all the outstanding features listed above, Grove LoRa-E5 will be a superior choice for IoT device development, testing, and long-distance, ultra-low power consumption IoT scenarios like smart agriculture, smart office, and smart industry. It is designed with industrial standards with a wide working temperature at -40℃ ~ 85℃, high sensitivity between -116.5 dBm and -136 dBm, and power output between 10 dBm and 22 dBm.

    Hardware Overview

    Applications

    • Works for LoRaWAN sensor nodes and any wireless communication application.

    • IoT device testing and development

    Factory AT Firmware

    LoRa-E5 series has a built-in AT command firmware, which supports LoRaWAN Class A/B/C protocol and a wide frequency plan: EU868/US915/AU915/AS923/KR920/IN865. With this AT command firmware, users can easily and quickly build their prototype or application.


    The AT command firmware contains a bootloader for DFU and the AT application. The "PB13/SPI_SCK/BOOT" pin is used to control LoRa-E5 to stay in the bootloader or jump to the AT application. When PB13 is HIGH, the module will jump to AT application after reset, with a default baud rate of 9600. When PB13 is LOW (press the "Boot" button on LoRa-E5 Dev Board or LoRa-E5 mini), the module will stay in the bootloader, and keep transmitting the "C" character every 1S at baud rate 115200.


    Attention

    1. Factory AT Firmware is programmed with RDP(Read Protection) Level 1, developers need to remove RDP first with STM32Cube Programmer. Note that regression RDP to level 0 will cause a flash memory mass to erase and the Factory AT Firmware can't be restored again.

    2. The "PB13/SPI_SCK/BOOT" pin on the LoRa-E5 module is just a normal GPIO, not the "BOOT0" pin of the MCU. This "PB13/SPI_SCK/BOOT" pin is used in the bootloader of the Factory AT firmware, to decide to jump to APP or stay in bootloader(for DFU). The real "BOOT0" pin doesn't pinout to the module, so developers need to be careful when developing low-power applications.

    Clock Configuration

    HSE32MHz TCXO
    TCXO Power Supply: PB0-VDD_TCXO
    LSE32.768KHz Crystal Oscillator

    RF Switch

    LoRa-E5 module ONLY transmits through RFO_HP
    Transmit(High Output Power, SMPS mode): PA4=0, PB5=1
    Receive: PA4=1, PB5=0

    Specifications

    Voltage Supply3.3V/5V
    Power OutputUp to +20 dBm at 3.3V
    Working Frequency868MHz/915MHz
    ProtocolLoRaWan
    Sensitivity-116.5dBm ~ -136dBm
    Modulation
    LoRa, (G)FSK, (G)MSK and BPSK
    Current
    Only 60uA in sleep mode
    Size
    20*40mm
    Working Temperature
    -40℃ ~ 85℃

    ECCN/HTS

    HS-CODE
    8517629900
    UPC

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products

    To install this Web App in your iPhone/iPad press and then Add to Home Screen.